Indonesian freeze-dried coffee team moves from FD-5E trial to a scale-up decision
catégorie

Indonesian freeze-dried coffee team moves from FD-5E trial to a scale-up decision

A freeze-dried instant coffee producer from Indonesia walked the KEMOLO production hall, reviewed the trial results of its FD-5E and went through what an FD-500E or FD-1000E line would demand.
Nov 12th,2026 2 Vues
Indonesian visitors examining the open door and tray stack of a large stainless freeze-drying chamber at the KEMOLO plant

Plant visit report

Indonesian freeze-dried
coffee team moves from
FD-5E trial to a
scale-up decision

A freeze-dried instant coffee producer from Indonesia walked the KEMOLO production hall, reviewed the trial results of its FD-5E and went through what an FD-500E or FD-1000E line would demand.

Origin IndonesiaFreeze-dried instant coffee project
Visit date 9 November 2026KEMOLO manufacturing facility
Trial unit FD-5EInstalled, commissioned, tested
Under evaluation FD-500E / FD-1000ECommitted to a phased decision

An Indonesian producer of freeze-dried instant coffee visited KEMOLO's manufacturing facility on 9 November 2026, reviewing the trial results of the FD-5E freeze dryer it bought earlier and working through the FD-500E and FD-1000E as the two candidates for commercial production.

The delegation was received by KEMOLO's technical and export teams. The day was split between the production hall and a technical session on capacity, utilities and the ramp-up schedule.

Inside the hall: chambers before they become a coffee line

The tour started at the far end of the hall, where stainless chambers stand in rows at different stages of assembly — shells without doors, chambers with shelf stacks fitted, and finished units waiting on their skids for shipment. The client's engineers moved along the row from the open doors inward, checking shelf spacing, the door sill, and how the tray stack sits inside the chamber.

Most of what stands on this floor is far larger than the FD-5E the client already runs in Indonesia, and that gap is the substance of the discussion: the same drying principle, a very different load per cycle, and therefore a different set of site requirements.

From there the group moved to the refrigeration and vacuum assemblies, the control cabinets, and the commissioning bay where a unit is run before it leaves. The conversation stayed close to the question the client came with — what has to be true in the building, in the utilities and in the operating routine before a bigger chamber makes sense.

Visitors inspecting the shelf stack inside an open freeze-drying chamber on the KEMOLO assembly floor
Assembly floor — chamber with door open, shelf stack visible; the client's team checks tray spacing and door access.
Wide view of the KEMOLO production hall with large stainless freeze-drying chambers and an overhead crane
Hall and transfer route — finished chambers move on a rail-guided trolley under the overhead crane, which also sets the ceiling height a larger line requires.

What the FD-5E trial settled

The FD-5E was bought as a validation platform rather than as production equipment: small enough to run the client's own extract in short cycles, large enough to produce samples that buyers can cup and approve.

Across the trial campaign the work concentrated on the four things that decide whether a freeze-dried coffee survives being scaled up. The first is the freezing step — how quickly the extract freezes sets the size of the ice crystals, and therefore the pore structure the vapour has to travel through during drying. The second is the pair of shelf temperature and chamber pressure during primary drying, which has to keep the sublimation front moving without the cake collapsing or the colour drifting at the edges of the tray.

The third is cycle length against load. A tray stack can be filled to the point where extra kilos stop paying for themselves in colour, aroma and moisture spread across the batch. The fourth is residual moisture: the figure that has to be hit for a product that sits on a shelf at ambient temperature rather than in a freezer.

Because the client roasts and extracts in-house, the trial also had to cover variation — different roast levels and extraction concentrations change bulk density, and a bulk density change moves the drying curve with it.

By the end of the visit both sides described the FD-5E results as meeting expectations: the unit covers recipe development, small-lot production and buyer samples, and the parameters it produced are now the input for sizing the next machine rather than a number to be re-derived from scratch.

KEMOLO's position on trial work is that a validation unit should be judged on what it lets a customer commit to — a fixed recipe, an approved sample and a defensible capacity figure — not on the throughput it delivers per hour.

Three models, three different jobs in a coffee project

The FD-5E, FD-500E and FD-1000E are not three sizes of the same purchase. Each answers a different stage of a freeze-dried coffee project, and the handover point between them is the trial data.

FD-5E

Validation

A small chamber sized for recipe work: enough tray area to fix freezing, drying and moisture targets on the customer's own extract, and enough output to fill sample orders while the recipe is still moving.

In this projectPurchased, installed and trialled

FD-500E

Scale-up

The step from validated recipe to commercial batches: a mid-size chamber that carries a fixed recipe into regular production without committing the building to a full volume line on day one.

In this projectUnder evaluation

FD-1000E

Volume

Built for the case where the volume target is a multi-year number rather than a first-year one — fewer, larger cycles, with the utilities, tray handling and crane capacity sized around that load.

In this projectUnder evaluation
If this describes your project The model normally in play
The recipe is still open and buyers are waiting on samples FD-5E
The recipe is fixed, volume is growing and one line has to carry it FD-500E
The volume target is a multi-year plan and one installation has to absorb it FD-1000E
You are deciding between the last two and have trial data in hand FD-500E, reviewed against FD-1000E

Batch capacity, tray area and utility figures are set per configuration and per product; they are quoted against a filled-in product sheet rather than read off a model name.

Where this project stands

Stage 1

Trial unit in place

FD-5E installed and commissioned in Indonesia; the client's own extract becomes the test material.

Stage 2

Process window fixed

Freezing profile, shelf temperature and pressure, cycle length and moisture target settled on the client's product.

Stage 3

Capacity review

FD-500E and FD-1000E compared on output target, building footprint, utilities and tray handling — the subject of this visit.

Stage 4

Phased release

Equipment scheduled against the client's ramp-up, with the FD-5E staying in service for development and samples.

What the technical session covered

The afternoon moved indoors, where a screened aerial view of the plant was used to walk through layout from the outside in: where raw chambers arrive, where they are assembled, and what footprint each size class occupies once installed on the customer's site.

Technical meeting between KEMOLO and the Indonesian delegation, with an aerial view of the plant on screen and both national flags on the table
Technical session — the client's team and KEMOLO engineers reviewing the plant layout on screen, with the FD-5E results and the two scale-up options on the table.

Footprint and layout

How a larger chamber sits in an existing building, including tray staging space and the route from dryer to packing.

Utilities and heat rejection

Power load, chilled water or glycol, hot water or steam, compressed air, and where the condenser's heat goes.

Tray handling and loading

Whether trays are hand-loaded, trolley-loaded or crane-assisted, and what each method costs in labour per batch.

Automation and records

Recipe storage, cycle logging and alarm history — the records a buyer's audit will ask for later.

Installation and commissioning

The release schedule against the client's ramp-up, so that capacity arrives when the orders do.

Training and spares

Operator training on the client's own product, plus the first-year spare parts list and the wear items to stock.

Why freeze-dried coffee, and why Indonesia

Indonesia is one of the region's large coffee origins, with distinct profiles running from Gayo and Mandheling in Sumatra through Toraja and Java to the robusta belt in Lampung. Much of that crop leaves as green beans; the value that stays in the country depends on how far the bean is processed before export.

Freeze-drying is the process that keeps most of what roasting created. Because the extract is dried from frozen, at low temperature and under vacuum, the volatile aromatics that give coffee its character are less exposed to heat than in spray drying, and the granules rehydrate into a product that reads closer to brewed coffee. The result is also shelf-stable at ambient temperature, which matters for a producer selling into hot, humid markets and into export containers.

That is the commercial reason a producer starts with a validation unit rather than a full line: the recipe decides the value, and the recipe is cheaper to fix on a small chamber than on a large one.

Questions this visit tends to raise

What does a freeze-dried coffee line cost?

Price is driven by batch size, cycle time, utility configuration and how much of the cycle is automated, so two plants with a similar chamber can land far apart. KEMOLO quotes against a filled-in product sheet — extract concentration, tray load, target output per day and the utilities available on site — rather than against a model name alone.

Is the FD-5E enough to start selling?

The FD-5E is a validation and small-batch unit. It is enough to lock a recipe, produce samples for buyers and run limited lots, and it stays useful after a larger machine arrives. It is not sized to carry a commercial volume target on its own.

FD-500E or FD-1000E — how is that decided?

From the trial data, the daily output target and the building. The drying curve from the FD-5E gives the cycle length per kilo; the sales plan gives the kilos; the building and its utilities then decide whether that load fits one FD-500E, needs an FD-1000E, or is better reached in phases.

Can KEMOLO trial our coffee before we buy?

Yes. Samples of extract or concentrate are run on a validation unit, and the trial reports back on cycle length, colour, aroma retention and residual moisture — the same four figures a scale-up decision is built on.

What does a commercial unit need on site?

Power, chilled water or glycol, hot water or steam, compressed air, drainage, and a way to reject condenser heat. The figures per model come with the datasheet; the requirement that is most often underestimated is tray handling space in front of the door.

Which models are available to buyers in Indonesia?

The FD-5E, FD-500E and FD-1000E are all supplied for export, with the documentation set, installation support and operator training arranged per project. Shipping, site preparation and commissioning are planned together so that the machine and the building are ready at the same time.

Send your extract spec and target output

We return a model recommendation with the utilities, footprint and release schedule it implies. If you are earlier than that, send a sample and start on a validation unit.

Plant-visit reports, model comparisons and commissioning notes from the KEMOLO works.
Plant visit report · 9 November 2026 © 2026 KEMOLO. All rights reserved.

Contactez-nous

Après avoir soumis votre demande, veuillez ne pas nous contacter par WhatsApp afin d'éviter les relances multiples.
Nom *
E-mail *
WhatsApp *
Contenu *
Type d'entreprise *
Fabricant
Commerce
Individuel
Capacité d'entrée *
Budget *
Le code de vérification *
Cliquez pour vérifier
Nous utilisons Cookie pour améliorer votre expérience en ligne. En continuant à naviguer sur ce site Web, vous acceptez notre utilisation des cookies. Cookie .